manualshive.com logo in svg

YOKOGAWA TA720, User Manual

Share
Download
YOKOGAWA TA720 User Manual Download Page 158

11-20

IM 704510-01E

11.8 Copying Files

Procedure

1.

Press the SHIFT+UTILITY(FILE) key to display the File menu.

2.

Press the Utility soft key.

When Function is set to Delete, the menu appears as follows.

3.

Press the Function soft key to display the Function menu.

4.

Press the Copy soft key to display the File List and Copy menus.

To limit the type of files to be displayed, press the Filter soft key to select *.XXX.

The XXX section of *.XXX varies depending on the File Item setting in the File

menu as follows.

Setup: *.SET, Measure: *.WVF (when Data Type is Bin) or *.CSV (when Data Type

is Ascii), or Statistics: *.CSV

Setting the Directory Containing the Copy Source Files

5.

Turn the rotary knob to select the storage medium (indicated with  ) and press the

SELECT key.

6.

Likewise, select the directory (indicated with < >) containing the copy source files.

[Path=......] shows the selected storage medium/directory.

Summary of Contents for TA720





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands