11-11
IM 704510-01E
Saving/Recalling Data and Outputting Screen Images
3
2
1
4
5
6
7
8
9
10
11
11
12
13
14
15
8.
Turn the rotary knob to select the measured results file.
Measured results files are files with the .wvf extension.
Executing the Recall Operation
9.
Press the Load Exec soft key.
While the data is being recalled, the soft key name changes to Abort. Press the
Abort soft key before the recall operation completes to abort the recall
operation.
CAUTION
Do not remove the storage medium or turn OFF the power while measured
results are being saved or recalled (while
is blinking). Such acts can damage
the storage medium or destroy the data on the storage medium.
Explanation
Save Destination Storage Medium
Measured results can be saved to the following three types of storage medium.
FD0:
Floppy disk
CA0:
PC card (when the number of partitions is 1)
CA0-1: PC card (when the number of partitions is 2 or more)
ND0:
Network drive
Data Type and Extension
The measured results can be saved to either of the data types below.
• Bin
The measured results are saved as binary data. The saved data can be recalled on
the TA720. A measurement data file with .wvf extension and a header file with .hdr
extension are saved. The header file is a file containing information that is necessary
when analyzing the saved measured data.
• Ascii
ASCII data in CSV format (.csv extension). The saved data cannot be recalled on the
TA720.
• When in hardware histogram mode
The median values and frequencies of the data in the window on the histogram
display are saved as text data. After the data is saved, the data cannot be recalled
on the TA720.
• When in time stamp mode or inter-symbol interference analysis mode
All the data (time stamps and measured values) of the measurement block are
saved as text data. After the data is saved, the data cannot be loaded on the
TA720.
11.5 Saving and Recalling Measured Results
