8-3
IM 704510-01E
Detailed Display Setup
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
Setting the Window Offset Value
9.
Turn the rotary knob to select Offset, and then press the SELECT key to show the
value entry area.
10.
Enter the desired offset using the numeric keys.
After entering the value, press the n key or
µ
key.
Updating the Window
11.
Turn the rotary knob to select Update to Window, and then press the SELECT
key.
The center, span, and marker values are updated.
Setting Window Values
12.
Turn the rotary knob to select one of the parameters, Label, Center, Left Marker,
or Right Marker, for the target window. Then, enter the value using the numeric
keys.
13.
Turn the rotary knob to select Span, and then press the SELECT key to show the
span selection window.
14.
Turn the rotary knob to select the span.
Copying Settings
15.
Turn the rotary knob to select Copy to Meas2 or Copy to Meas1, and then press
the SELECT key.
If you selected Meas1 in step 6, Copy to Meas2 appears; if you selected Meas2,
Copy to Meas1 appears.
Selecting the Window to Be Displayed
16.
Press the ESC key to close the Window Parameter Setting dialog box.
17.
Press the WindowNum soft key from the Display menu.
18.
Turn the rotary knob to select the window to be displayed.
8.2 Setting the Multi Window
