manualshive.com logo in svg

YOKOGAWA TA320, User Manual

Share
Download
YOKOGAWA TA320 User Manual Download Page 116

11-4

IM 704210-01E

11.3 Using the Error Logging Function

P r o c e d u r e

• To exit from the current menu, press any of the top menu keys.

UTILITY Top Menu

MODE

FUNCTION

DISPLAY

SAMPLE

INPUT

UTILITY

Displays the error log window.

Selects the UTILITY menu.

(Displays the software version).

1.

Press the UTILITY key to display the UTILITY top menu.

2.

Press the NEXT touch key to display NEXT 2/3 on the key.

Displaying/clearing messages

3.

Press the ERROR LOG touch key to display the error log window.

4.

If there are so many warnings messages that they cannot be  displayed on the screen at the

same time, turn the rotary knob to scroll the messages.

5.

To clear the messages, press the CLEAR touch key.

6.

To close the error log window, press the OK touch key.

Error log window

Displays warning messages.

Clears the messages.

Closes the error log window.

Explanation

If a warning message(s) or a communications related message(s) occurs, the warning mark will

appear as shown below.  In this case, you can refer to the message(s) whenever you want by

opening the error logging window.

MODE

Warning mark

Note

Communications related errors can be cleared by the above procedure.  Warning messages will disappear

automatically when the measurement is re-started and completed successfully.

Summary of Contents for TA320

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands