YOKOGAWA TA220, User Manual, Page: 120 / 178

10-30
IM 704610-01E
10.2 Commands
:STATus?
Function Queries all settings related to the
communication status.
Syntax :STATus?
Example :STATUS?
-> :STATUS:EESE 0;FILTER1 RISE
;FILTER2 NEVER;FILTER3 NEVER
;FILTER4 NEVER;FILTER5 NEVER
;FILTER6 NEVER;FILTER7 NEVER
;FILTER8 NEVER;FILTER9 RISE
;FILTER10 RISE;FILTER11 RISE
;FILTER12 RISE;FILTER13 RISE
;FILTER14 NEVER;FILTER15 NEVER
;FILTER16 NEVER;QMESSAGE 1
:STATus:CONDition?
Function Queries the contents of the status register.
Syntax :STATus:CONDition?
Example :STATUS:CONDITON?
-> 1
:STATus:EESE
Function Sets the extended event enable register or
queries the current setting.
Syntax :STATus:EESE {<Register>}
:STATus:EESE?
<Register> = 0 to 65535
Example :STATUS:EESE 257
:STATUS:EESE?
-> :STATUS:EESE 257
:STATus:EESR?
Function Queries the contents of the extended event
register and clears the register.
Syntax :STATus:EESR?
Example :STATUS:EESR?
-> 1
:STATus:ERRor?
Function Queries any error codes that occurred and
message information (top of the error queue).
Syntax :STATus:ERRor?
Example :STATUS:ERROR?
-> 113,"Undefine header"
:STATus:FILTer
Function Sets the transition filter or queries the current
setting.
Syntax :STATus:FILTer<x> {RISE|FALL|
BOTH|NEVer}
:STATus:FILTer
<x> = 1 to 16
Example :STATUS:FILTER1 RISE
:STATUS:FILTER1?
-> :STATUS:FILTER1 RISE
:STATus:QMESsage
Function Sets whether or not to attach message
information to the response to the
“ :STATus:ERRor? ” query or queries the
current setting.
Syntax :STATus:QMESsage {<Boolean>}
:STATus:QMESsage?
Example :STATUS:QMESSAGE OFF
:STATUS:QMESSAGE?
-> :STATUS:QMESSAGE 0
10.2.16 STOP Group
:STOP
:STOP
Function Stops measurement.
Syntax :STOP
Example :STOP
Explanation Cannot be executed when
INPut:HISPeed:STATe (D-to-C high speed
calculation) is ON.
10.2.17 STORe Group
:STORe <Space> <NRf>
:STORe
Function Stores the current settings
Syntax :STORe {<NRf>}
<NRf> = 0 to 6
Example :STORE 0