5
TI 01W06A51-50EN
Mar.26,2019-00
3.
Assembly and Wiring
Check that the necessary items described in the preceding chapter have been prepared, and
carry out assembly and wiring.
3.1
Connecting the Ethernet Cable
The gateway receives power from the PoE switch or injector through the Ethernet cable to carry
out operations. Therefore, the Ethernet cable must be connected even if LTE communications
are used as a connection to data collection server. Attach the provided cable gland to the
Ethernet cable regardless of whether the gateway is used indoors or outdoors
(1) Remove the cable gland from the main unit.
(2) Pass the Ethernet cable through the outermost screwing part of the cable gland, and attach
the waterproof rubber and rubber holding part.
(3) Connect the Ethernet cable to the Ethernet connector of the gateway.
(4) Attach the cable gland to the screwing part of the gateway. The standard tightening torque
for the cable gland is 1.18 N•m.
Figure 3-1 Cable gland components
Figure 3-2 Attaching the cable gland to the Ethernet cable