manualshive.com logo in svg

YOKOGAWA Sushi Sensor, Technical Information, Page: 25 / 29

Share
Download
YOKOGAWA Sushi Sensor Technical Information Download Page 25

24

TI 01W06A51-50EN

Mar.26,2019-00

7. Troubleshooting

7.1 

Checking Sushi Sensor Connection Status

This section describes how to check the Sushi Sensor connection status via the gateway.

(1)  Access the gateway via the Web browser, and log in to the gateway.

(2)  Click [Status & Logs] to display the sub menu. Click [Statistics].
(3)  Click the [LoRa] tab to display the list of Sushi Sensors connected to the gateway.

(4)  Check whether the target Sushi Sensor is displayed in the list and whether data is 

received from the Sushi Sensor.

Item

Description

EUI

EUI-64 address of the Sushi Sensor connected to the gateway.

Join Time

Time at which the Sushi Sensor has connected to the gateway.

PktsUp, PktDown

Message sending/receiving counter for the Sushi Sensor.

If the target Sushi Sensor is not found in the list or the message sending/receiving counter is not 

incremented, it is assumed that the Sushi Sensor battery power has been empty, the network 

setting is not correct, the distance between the Sushi Sensor and the gateway is too long, or 

there is a problem with the communication environment.

Summary of Contents for Sushi Sensor






























Reviews:

No comments