1-17
IM 04P03B01-01E
Functional Explanation and Setup Guide
For the procedure to set the functions, see section 1.6, “Function Setup Guide.”
1
1.3 Recording
Header Printout (/BT1 Option)
When recording is started, the Start printout is performed, and recording starts. During
trend recording, you can print out messages (up to 5) that include measured values.
When recording is stopped, End printout is performed.
1. Chart paper feed
2. Start printout
3. Recording start
(Record start)
Operation
(Operation
instruction)
1. Recording stop
2. End printout
3. Chart paper feed
(Recording stop)
Message printout 1
including measured
values
(Message printout 1)
Message printout 2
including measured
values
(Message printout 2)
• Example Printout (Dot Model)
Message printout 1 including
measured values
Message printout 2 including
measured values
End printout
Comment
Batch name (batch number and lot number)
date/time, and chart speed
Start printout
Comment
Batch name (batch number and lot number)
date/time, and chart speed
The printout examples may appear differently from the actual printout as a result of functional
improvements made on the recorder after this manual was written.
Start Printout and End printout
You can set “Start printout” and “Start printout 2” for the printout when recording starts.
Also, you can set “End printout” and “End printout 2” for the printout when recording stops.
Printout/Operation
Description
Notes
Comment
Prints 32 characters x 5 lines or less.
Batch name
Batch number
Prints up to 26 characters.
Lot number
Prints a number from 4-digits or 6-digits.
You can automatically increment
by 1 when recording stops.
Date/time
The date format prints out according to the date
Date and time cannot be turned
printout/display format.
On/Off independently.
Chart speed
Prints the current chart paper feed speed.
Chart paper feed
Feeds the chart paper 50 mm or less before Start printout. Steps of 1 mm
Feeds the chart paper 50 mm or less after End printout.
Steps of 1 mm
Ejection of pen offset
You can record the portion of the data that remains after
When pen offset compensating
compensating data
recording stops. Also, when recording the remaining
is On (pen model).
portion of the data, you can change the chart speed to
450 mm/h (fixed).
You can select whether to print out the batch name, date/time, and chart speed. By default, the printout is enabled.
