2-1
TI04L55B01-01EN
2. Scalable Data Acquisition System
2.1
Component Devices
A single GM unit consists a combinat-ion of the following modules and a module base. A data
acquisition module is linked to the left of the power supply module, and input/output modules are
linked on the left side of the data acquisition module.
A multi unit system (see the later explanation) is configured by linking expansion modules and
connecting units over a LAN network.
A module base is used to link a data acquisition module, input/output modules, and expansion
module.
Name
Model
Component Names
Description
Data Acquisition
Module
GM10
START/STOP key
USER key
USB port
RS-422/485 serial port
(/C3 option)
Ethernet port
Status display area
7 segment LED×2
A module for acquiring data.
It is linked to the left of the power supply
module. (The position is fixed.)
Only one module in a system.
Power Supply Module
GM90PS
Power switch
Power inlet or
terminal (M4)
A module for supplying power to the unit.
Supply voltage:
100-240 V AC, 12-28 V DC
Input/output Module
GX90□□
—
A module for receiving and transmitting
signals.
Module Base
GM90MB
A base is used to link a data acquisition
module, input/output modules, and
expansion module.
Expansion Module
GX90EX
Setting switches
Status display area
7 segment LED×2
Port
A module for connecting units over a LAN
network.
An expansion module is installed in each
unit to configure a multi unit system.
The firmware version of the GX90EX
that can be used with the GM must be
R1.02.01 or later.
Input/output Module
Name
Model
Name
Model
Analog Input
GX90XA
Analog Output
GX90YA
Digital Input
GX90XD
PID Control
GX90UT
Pulse input
GX90XP
Digital Output
GX90YD
Digital Input/output
GX90WD
Input/output modules may need to have their firmware updated.
For details, see the general specifications (GS 04L53B01-01EN, GS 04B53B01-31EN).
2
Scalable Data
Acquisition System
Summary of Contents for SMARTDAC+ GM
Page 2: ...Blank Page...
