YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 488

Page: 488 / 589

15-47

IM 701240-01E

Ethernet Interface (Option)

App

Index

15.10 Setting the FTP Passive Mode and LPR/SMTP

Timeout

Procedure

Press

MENU

Press

Next 1/2

soft key.

Press the

Network

soft key.

Press the

Others

soft key. The Others setup menu appears.

Selecting the FTP Passive Mode

Use

jog shuttle

SELECT

to set FTP Passive to ON or OFF.

Setting the LPR Timeout Time

Use

jog shuttle

SELECT

to set LPR Time Out.

Setting the SMTP Timeout Time

Use

jog shuttle

SELECT

to set SMTP Time Out.

Explanation

Special settings related to the FTP client, LPR, and SMTP are entered. Normally, these

parameters do not need to be specified.

Turning ON/OFF FTP Passive Mode

Turn this function ON when using the SL1400 behind a firewall that requires the passive

mode. The default setting is OFF. (A firewall is furnished on a system that has security

features. It prevents intrusion from the outside into the network system.)

Setting the LPR Time Out

The SL1400 closes the connection to the printer if there is no response from the printer

for a certain period of time (timeout time) when it accesses the printer. You can set the

timeout value in the range of 0 to 3600 s. The default setting is 15 s.

Setting the SMTP Time Out

When a mail server is accessed from the SL1400 and connection cannot be established

after a certain period of time (timeout time), the SL1400 decides that the connection to

the mail server is not possible and closes the connection. You can set the timeout value

in the range of 0 to 3600 s. The default setting is 15 s.

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands