YOKOGAWA SL1400 ScopeCorder LITE User Manual Download Page 425

Page: 425 / 589

13-54

IM 701240-01E

Selecting the File to Be Deleted One at a Time

Turn the

jog shuttle

to select the file.

Press the

Set/Reset

soft key. An asterisk (*) is displayed to the left of the

selected file to indicate that it will be deleted. Pressing the

Set/Reset

soft key

again removes the asterisk (*) to the left of the selected file. The file will not be

deleted.

Proceed to step 13.

Selecting the Files to Be Deleted at Once

10.

Turn the

jog shuttle

to select the file, directory, or medium.

11.

Press the

All Set

soft key. Asterisks (*) are displayed to the left of every file in

the directory containing the selected file or directory to indicate that they will be

deleted. At the same time, the

All Set

soft key changes to an

All Reset

soft key.

12.

Press the

All Reset

soft key. Asterisks (*) are removed from the left of every file

in the directory containing the selected file or directory to indicate that they will

not be deleted. At the same time, the

All Reset

soft key changes to an

All Set

soft key.

Executing the Delete Operation

13.

Press the

Delete Exec

soft key. All files with asterisk marks are deleted.

Specifying the Files to Be Displayed in the File List Window and Displaying Properties

14.

Carry out steps 19 to 21 in section 13.9.

Explanation

Selecting the Storage Medium and Directory (File List)

Media on which saving and loading are possible are displayed on the File List window.

• Display Example of Storage Media

[PC Card]:

PC card

[HD]:

Hard disk

[SCSI5]:

SCSI device with the ID number set to 5

[SCSI5-1]:

Partition 1 of a SCSI device whose ID number is 5

[NetWork]:

Network drive (when the Ethernet interface option is installed)

[USB]:

USB storage device

1. When a SCSI device whose ID number is 5 is connected

13.16 Changing the File Attributes and Deleting Files

Summary of Contents for SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands

YOKOGAWA SL1400 ScopeCorder LITE, User Manual

Search results

Summary of Contents for SL1400 ScopeCorder LITE

Reviews:

Related manuals for SL1400 ScopeCorder LITE

Brands by name

Popular brands