5-9
IM 720120-01E
External I/O T
erminals
1
2
3
4
5
6
7
App
Index
5.6 Connecting the GO/NO-GO Output Terminals
CAUTION
• Do not apply external voltage to the GO/NO-GO output terminals. If you do, the
SL1000 may malfunction.
• Do not short between GO/NO-GO output terminals. If you do, the SL1000 may
malfunction.
• Be sure to turn OFF the power switch when connecting (or removing) signal
wires to the GO/NO-GO output terminals.
French
ATTENTION
• Ne pas appliquer une tension externe aux bornes de sortie GO/NO-GO. Le
dispositif SL1000 risquerait alors de mal fonctionner.
• Ne pas créer de court-circuit entre les bornes de sortie GO/NO-GO. Le dispositif
SL1000 risquerait alors de mal fonctionner.
• Bien couper l’alimentation lors du branchement (ou du débranchement) des
câbles de signal aux bornes de sortie GO/NO-GO.
GO/NO-GO Output Terminals
The GO/NO-GO judgement result on the SL1000 can be output externally.
GO NOGO
Item
Specifications
Connector type
Screwless terminal
Output level
TTL level (0 to 5 V)
Logic
High level when normal, low level when a given judgment is made
Connecting or Removing the Signal Wires
Press down on the top section of the screwless terminal with a flat-blade screwdriver and
insert the stripped tip of the signal wire into the terminal. Check that the signal wire is
securely locked to the terminal.