1-2
IM 720120-01E
Rear Panel
Trigger output terminal
External trigger
input terminal
Power switch
Power
connector
Ethernet port (option)
Rotary switch
GO/NO-GO output terminals
DIP switch
Outputs alarm signals.
→
Section 5.4
→
Section 3.4
→
Section 3.4
Used to connect to a network.
→
Section 4.1
Delivers GO/NO-GO
determination output signals.
→
Section 5.6
Not used.
Used to output external
trigger signals.
→
Section 5.3
Used to apply external
trigger signals.
→
Section 5.2
Sets the group and unit
ID of the unit.
→
Section 4.1
TRIG OUT
TRIG IN
POWER
ON
OFF
100-120 V
220-240 V AC
300 VA MAX 50/60 Hz
GROUP UNIT
SERVICE
GO NOGO
ALARM
REMOTE
SYNC OUT
SYNC IN
LINK
ACT
ETHERNET
1000BASE-T
Cooling fan
→
Section 3.2
Inputs remote signals.
→
Section 5.5
Remote input
terminals
Alarm output terminals
Used for synchronous
operation.
→
Section 5.7
Sync input
connector
Sync output
connector
Used for synchronous
operation.
→
Section 5.7
Note
Be sure to use the DIP switch at the factory default setting. If you change the setting, the
SL1000 may not operate properly.
bit 1 2 3 4
Status OFF OFF OFF OFF
Factory default settings
ON
OFF
1 2 3 4
1.1 Front Panel and Rear Panel