3-5
IM DL950-02EN
Basic Setup (Basic)
2.
Tap
Basic
, or press the soft key. The following screen appears.
Recording time
Record length
Scroll to display record lengths that do not fit in the screen.
Sample interval
Slide to display sample intervals
that do not fit in the screen.
With the time base in detail setup (Detail) is set to external clock signal.
Acquisition conditions
Select from the following three options.
Acquisition Time (specified acquisition time)
Continuous (continuous acquisition)
Capture on Trigger (triggered acquisition)
When the acquisition method is set to SSD
Recording, this is fixed to Acquisition Time.
Acquisition method
Select from the following three methods.
Memory
Save on Stop
SSD Recording
Setting the Acquisition Conditions
Set when to start or stop waveform acquisition when the START/STOP button is pressed.
Acquisition Time:
Waveform acquisition starts when the START/STOP button is
pressed. When the specified time elapses, waveform acquisition stops
automatically.
Continuous:
Waveform acquisition starts when the START/STOP button is pressed.
When the button is pressed again, acquisition stops.
Capture on Trigger: When you press the START/STOP button, the instrument enters
the trigger-wait state. Waveform acquisition starts when a trigger
occurs. When the specified time elapses, waveform acquisition stops
automatically.
Specify this when you want to start waveform acquisitions with triggers.
Setting the Acquisition Method
Set the waveform data acquisition method.
Memory:
Waveform data is saved in the internal memory. The data is cleared
when waveform data acquisition starts again or when the power is
turned off.
Save on Stop: Waveform data is saved and the internal memory. After acquisition
stops, the data is saved in the SSD or USB memory.
The data saved in the internal memory is cleared when waveform
data acquisition starts again or when the power is turned off.
SSD Recording:
Waveform data is saved in the SSD. This is valid on models with
the /ST1 option.
3.2 Setting Conditions for Waveform Acquisition (Recorder mode)
