manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 74

3-2

IM DL950-02EN

3.1  Setting Conditions for Waveform Acquisition 

(Scope mode)

This section explains the following settings for acquiring waveforms in Scope mode:

Applicable in Scope Mode (dual capture mode off)

•  Record length
•  Acquisition mode
•  Trigger mode
•  Waveform acquisition count
•  Time base
•  Time scale setting

► “Waveform Acquisition” in the Features Guide

ACQUIRE menu

1.

  On the waveform screen’s 

MENU

, tap 

ACQUIRE 

> 

ACQUIRE

, or press 

ACQUIRE

. The 

ACQUIRE menu appears.

 

When the dual capture mode is on, the dual capture menu appears. See section 3.4, “Using 
the Dual Capture Feature (Scope mode only).”

When the Acquisition Mode Is Set to Normal or Envelope

  

Set the time base (Internal, External).

Set the number of 

waveform acquisitions.*

Set the trigger mode.

Set the acquisition mode to Normal (normal) or Envelope (envelope).

Set the record length.

Set real-time recording. ► sec. 3.5 (/ST1 option)

External

Set the pulse/rotation.

* When SSD Recording is off or when the trigger mode is set to Auto, AutoLevel, or Normal

When the trigger mode is set to Single N

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands