manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 286

20-12

IM DL950-02EN

20.8  Configuring a Network Printer

This section explains the following settings for printing screen images to a network printer:

Items Common to Scope Mode and Recorder Mode

•  LPR server
•  LPR name
•  Timeout

► “Network Printer (Net Print)” in the Features Guide

UTILITY Network Menu

1.

  On the waveform screen’s MENU, tap 

OTHERS

 > 

UTILITY

, or press 

UTILITY

.

2.

 Tap 

Network

, or press the soft key. The following screen appears.

  

Select Network.

Configure the FTP server. ► sec. 20.3

Configure the Web server. ► sec. 20.4

Configure the TCP/IP settings 

► sec. 20.2

Configure mail settings. 

► sec. 20.6

See “Configuring the Network Printer.”

Configure the network drive. ► sec. 20.5

Configure SNTP. ► sec. 20.7

Configure the TCP/IP settings 

► sec. 20.2 (/C60 option)

Configuring the Network Printer (Network Print)

3.

 Tap 

Network Print

, or press the soft key. The following screen appears.

  

Set the timeout value (1 to 60 s).

Set the LPR server (IP address, or when DNS is 

enabled, the host name and domain name).

Set the LPR name (name of shared printer).

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands