manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 14

1-5

IM DL950-02EN

1.4  Configuring with the Application Menu

This section explains how to easily configure the instrument using the measurement applications 
registered in advance.

Items Common to Scope Mode and Recorder Mode

Configuration on the Application Menu

► “Application (APPLICATION)” in the Features Guide

APPLICATION Menu

1.

  On the waveform screen’s 

MENU

, tap 

APPLICATION

, or press 

APPLICATION

.

  

Favorites display area

Register in favorites.

Applications 

registered in advance

Editing Favorites

2.

 Tap 

Edit Favorites

, or select 

Edit Favorites

 using the jog dial or arrow keys, and press 

SET

. 

The favorites display area becomes editable.

  

Tap the location where 

you want to register at.

Finishes the registration

Registered application

3.

  Tap a location to register an application to, or select it using the jog dial or arrow keys, and 

press 

SET

. A list of applications appears.

 

To change an application that is already registered, tap the location where the application is 
registered, or select it using the jog dial or arrow keys, and press 

SET

.

4.

  Tap the application you want to register, or select it using the jog dial or arrow keys, and press 

SET

. The application is registered in favorites.

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands