manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, User Manual

Share
Download
YOKOGAWA ScopeCorder DL950 User Manual Download Page 124

5-6

IM DL950-02EN

5.4  Configuring the Detailed Display Settings

This section explains detailed display settings such as scale display and font size.

Items Common to Scope Mode and Recorder Mode

•  Scale value’s display item
•  Scale font size
•  Horizontal axis display mode
•  Turning the extra window on and off
•  Number of displayed digits for analysis results (1 to 20)
•  Font size for displaying analysis results
•  Menu font size
•  Screen background color
•  Turning the trace label display on and off
•  Turning the level indicator on and off
•  Channel information
•  Channel information display range
•  Turning the manual event display on and off

► “Detail Setup (Detail Setup)” in the Features Guide

Display Menu

1.

  On the waveform screen’s 

MENU

 tap 

DISPLAY > DISPLAY

, or press 

DISPLAY

. The Display 

menu appears.

  

See “Detail Setup.”

Set the display format. ► sec. 5.1

Select the display group you want to edit. 

► sec. 5.1

Set the grid. ► sec. 5.3

Set the waveform arrangement, color, and grouping. 

► sec. 5.2

Set the interpolation method. ► sec. 5.3

Turns accumulation on and off (Scope mode only) 

► sec. 5.5

Summary of Contents for ScopeCorder DL950





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands