manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 205

18-1

IM DL350-01EN

18 Waveform Display Position and Zoom (Recorder 

mode only)

You can magnify displayed waveforms along the time axis. The zoomed waveform of one locations can be 
displayed. You can also specify which channel you want to zoom in on. You cannot zoom if the number of 
displayed points on the screen is less than or equal to 100.

Zoom window

Zoom box

Example of the Zoom Display

Main window

Vertical Zoom

You can magnify displayed waveforms along the vertical axis by using the Channel menu.

Turning the Zoom Window Display (Display) On and Off

Set whether to display the zoom window. When a zoom window is displayed, a zoom box appears in the main 
window. It indicates what part of Main window is being zoomed in on.
•  ON: The zoom window is displayed.
•  OFF: The zoom window is not displayed.

Time Range of the Zoom Window

Set the zoom factor in time range. The zoom-window time scale changes automatically based on the specified 
zoom factor.

Selectable Range

Two times the time scale (record time) of the main window to the point where the number of data points in the 
zoom window reaches 10 points per div.

•  When an external clock signal is being used as the time base, you can select one of the following 

magnifications. You can select any magnification up to the point where the number of data points in the 
zoom window reaches 10 points per div.

  Up to 1000000 in 1-2.5-5 steps (×2, ×2.5, ×5, ×10, ×25, ×50, ×100, ×250, ×500, ×1000, ×2500, and so on)
•  The upper limit of the zoom factor during SD recording is the maximum zoom factor that can be displayed 

during SD recording.

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands