manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 142

8-13

IM DL350-01EN

Loading Waveform Data (Waveform Load)

You can load waveform data that are saved.
Waveform data in binary format (files with .WDF extensions) can be loaded.
You can load a specified waveform data file with the setup data. All the data in the file is loaded. Waveforms 
of computed data appear when computation is turned on. Because setup data is also loaded, the instrument 
settings change when you load waveform data. If you start waveform acquisition by pressing the START/STOP 
key, the loaded data is cleared.

  If the module configuration when the waveform data is saved and that when the data is loaded are different, 

you cannot load the waveform data.

Loading Setup Data (Setup Load)

The setup data of the specified file is loaded. The extension is .SET.
* The following settings will not be changed.

  Date and time, time synchronization feature, storage media format, USB keyboard language, USB 

communication feature, menu background color, key lock, network

  If the module configuration when the setup data is saved and that when the data is loaded are different, only 

the setup data of modules that match is loaded. When loading is complete, a message indicating the channel 
numbers that were not loaded is displayed.

Loading Other Types of Data (Others Load)

This is selectable only in scope mode.
The snapshot waveforms of the specified file or the contents of a symbol definition file are loaded.

Snapshot Waveforms (Snap)

The extension is .SNP. The snapshot waveforms that you load are displayed in white on the screen.

Symbol Definition Files (Symbol)

The extension is .SBL. These are CAN data 

 or LIN data 

 definition files.

This is displayed when a CAN bus monitor or CAN & LIN bus monitor module is installed.

Loading Symbols (Symbol Load)

This is available in recorder mode when a CAN bus monitor or CAN & LIN bus monitor module is installed.
The specified symbol definition file is loaded.
The extension is .SBL. This is a CAN data 

 or LIN data 

 definition file.

Loading (Execute Load)

Loads the data of the specified file.

8  Saving and Loading Data

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands