manualshive.com logo in svg

YOKOGAWA ROTAMETER RAMC, User Manual, Page: 35 / 49

Share
Download
YOKOGAWA ROTAMETER RAMC User Manual Download Page 35

8. Service

8-1

All Rights Reserved. Copyright © 2006, Rota Yokogawa 

IM 01R01B02-01E-E    5th edition October 01, 2020 -00

8.  Service

In case of power down or defect electronic the device indicates compatibility information on an equipped label 

(see figure 3.3 for label position).  

Manufacturer:                    Rota Yokogawa  
Device type: 

Variable Area 

SOFTWARE_REVISION:  V3.40.2-[1…1] 
IDENT_NUMBERS: 

4582 [9700] 

 

SOFTWARE REVISION-[

Dev_Rev_Comp…Dev_Rev]

Dev_Rev_Comp:

Parameter in FW (see Appendix 1)

Dev_Rev: 

Parameter in FW (see Appendix 1)

SOFTWARE REVISION: Parameter in FW (see Appendix 1)

Figure 8.1 Profibus PA example label

The information enables a compatibility judgement for Device driver’s revision (DEVICE_REVISION). 

If the DEVICE_REVISION fulfils:

 

Dev_Rev_Comp ≤ DEVICE_REVISION ≤ Dev_Rev

the drivers are compatible with the device. E.g. an installed device driver (EDD or DTM) inside the host system 

can be used with a newer device as long as the Dev_Rev_Comp parameter indicates that the MS1/MS2 

related behaviour of the device supports the older version.

The DEVICE_REVISION is integrated in the file name of the EDD as number nn, e.g. filename_nn_xx.

Summary of Contents for ROTAMETER RAMC


















































Reviews:

No comments