manualshive.com logo in svg

YOKOGAWA MVAdvanced MV1000, User Manual, Page: 179 / 310

Share
Download
YOKOGAWA MVAdvanced MV1000 User Manual Download Page 179

6-25

IM MV1000-01E

D

splay Conf

gurat

on

1

2

3

4

5

6

7

8

9

10

11

12

13

App

Index

  MV2000

 

Press

 MENU 

and then select

 Menu t

ab >

 Meas channel 

>

 Zone, Scale, Bar graph

.

 

 

 

Settngs

•  Bar graph > Drecton

  Set the bar graph display direction to Horizontal or Vertical.

•  Frst-CH, Last-CH

  Select the target channels. All of the other settings selected here will be applied to 

these channels.

•  Bar graph > Base poston

  Set the base position of bar graphs to Normal, Center, Lower, or Upper. A description 

of how the MV displays bar graphs depending on this setting is given on the following 
pages. This setting is applied to the bar graph display and to the bar that indicates the 
current value on the scale in the trend display.

6.11  Changng the Bar Graph Dsplay Method

Summary of Contents for MVAdvanced MV1000























































































































































































































































































































Reviews:

No comments