manualshive.com logo in svg

YOKOGAWA MVAdvanced MV1000, User Manual

Share
Download
YOKOGAWA MVAdvanced MV1000 User Manual Download Page 172

6-18

IM MV1000-01E

6.8  Dsplayng Alarm Value Marks and Color Scale 

Bands

This section explains how to display alarm value marks on the scale and how to display 
a color band over a specified range.

 For an explanation of these functions, see section 1.4.

Dsplay

MV1000

Press

 MENU 

and then select

 Menu tab 

>

 Meas channel 

>

 Alarm mark 

or

 Color scale 

band

.

 

 

 

MV2000

Press

 MENU 

and then select

 Menu tab 

>

 Meas channel 

>

 Alarm mark

,

 Color scale 

band

.

 

 

Settngs

 

 

Alarm value mark

Color scale band

•  Frst-CH, Last-CH

  Select the target channels. All of the other settings selected here will be applied to 

these channels.

Summary of Contents for MVAdvanced MV1000























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands