manualshive.com logo in svg

YOKOGAWA MT300, Getting Started Manual, Page: 55 / 89

Share
Download
YOKOGAWA MT300 Getting Started Manual Download Page 55

4-4

IM MT300-02EN

4.4  24 VDC Output (24 V OUT) (/DM option)

 CAUTION

•  Do not short or apply an external voltage to the 24 VDC output terminal. If you do, the 

instrument may malfunction.

•  If this instrument is run continuously off of the battery pack with the load current through 

the 24 VDC output exceeding 20 mA, the battery pack consumption will increase, which will 
reduce the instrument running time.

French

 ATTENTION

•  Ne pas court-circuiter ou appliquer une tension externe à la borne de sortie de 24 VDC. Si 

vous le faites, l’instrument risque de ne pas fonctionner correctement.

•  Si cet instrument fonctionne en continu hors du pack de batteries avec un courant de 

charge sur la sortie de 24 VDC supérieur à 20 mA, la consommation du pack de batteries 
augmente, ce qui réduit le temps de fonctionnement de l’instrument.

24 VDC Output (24 V OUT)

A 24 V DC voltage is output when performing loop current measurement.

 

Item

Specifications

Supply voltage, current

Communication resistance is off: 24 V±1 VDC, 24 mA

Communication resistance is on: 24 V±6 VDC, 20 mA

Terminal

Plug-in terminal (Φ4mm banana jack (female type))

Note

For details on loop current measurement, see section 4.5 in the user’s manual (IM MT300-01EN).

Summary of Contents for MT300


























































































Reviews:

No comments