Name and Functions of Each Part
17
IM 767361-01E
5.
PARAMETER SET keys
Selects parameters to be set, and increments the active (blinking) digit.
Selects parameters to be set, and decrements the active (blinking) digit.
Changes the active digit.
ENTER/
Enters the selected values.
LOCAL
Clears remote mode.
6.
MEMORY keys
STORE
Stores data in the internal memory.
RECALL
Recalls data from the internal memory.
DELETE
Deletes data from the internal memory.
No.
Designates the memory number to which data is to be stored or from
which it is to be recalled.
7.
ZERO CAL (Zero Calibration) key
Performs zero pressure calibration.
8.
POWER switch
Turns the power ON and OFF during daily operation.
9.
DISPLAY keys
RELATIVE
Displays pressure as a relative value.
UNIT
Switches the unit of measured pressure.
HOLD
Stops acquisition of data and puts the displayed data on hold.
TRIG
The trigger is activated once while the data is on hold.
10.
DMM keys
DC5 V/20 mA
Selects whether voltage or current is to be measured.
ON/OFF
Selects whether the DMM function is to be used or not.
11.
24 V output key
Turns 24 V output ON and OFF.
12.
Pressure input port
A pressure input port is also provided on the rear panel, but it is not possible to
use both ports at the same time.
13.
Pressure input port (Low)
A pressure input port is also provided on the rear panel, but it is not possible to
use both ports at the same time.
14.
Pressure input port (High)
A pressure input port is also provided on the rear panel, but it is not possible to
use both ports at the same time.
15.
Voltage input terminal
For measuring voltage using the DMM function.
16.
Current input terminal
For measuring current using the DMM function.
17.
24 VDC output connector
Supplies 24 VDC.
18.
Comparator monitor LED (/DA option only)
Displays the results from the comparator function.
Displays the result of the comparator function.
Name and Functions of Each Part
