manualshive.com logo in svg

YOKOGAWA mR10000 436101, Manual

Share
Download
YOKOGAWA mR10000 436101 Manual Download Page 148

IM 04P01B01-01E 

7-4

7.2  Changing the Integration Time of the A/D 

Converter

This section explains the details of setting the integration time of the A/D converter.
Basic Setting mode cannot be entered when recording is in progress or when 
computation is in progress on models with the computation function (/M1 option).

Procedure

Changing the Settings

1.

  Hold down the 

MENU

 key for 3 seconds to enter Setting mode.

2.

  Hold down the 

 and 

 keys simultaneously for 3 seconds to enter Basic 

Setting mode.

3.

  Press the 

 key or 

SHIFT

 + 

 key to select 

A/D

 and then press the   key.

4.

  Set each item and press the   key.

Use the 

 key or 

SHIFT 

+ 

 key to select values.

For the procedure on how to enter values or characters, see section 4.2.
If you press the 

ESC

 key in the middle of the operation, the settings entered up to 

then are cancelled, and the display returns to a higher level menu.

5.

  When the 

Setting complete

 screen appears, do either of the following:

To correct the setting, press the   key.
If you are done, press the 

ESC

 key.

  

Select the integration time of the 

A/D converter.

The new setting takes effect.

ESC/?

A/D Integrate

Setting complete

Basic=A/D

Integrate=Auto

Applying the Changes and Returning to Operation Mode

Press the 

 key or 

SHIFT

 + 

 key to select 

End

 and then press the   key. Press 

the 

 key to select 

Store

 and then press the   key. The changes are applied, and 

the screen returns to Operation mode. If you select 

Abort

 and press the   key, the 

changes are discarded, and the screen returns to Operation mode. Press the 

ESC

 key to 

return to the 

Basic=

 screen.

Explanation

Integrate

Selects the integration time of the A/D converter.

Setting

Integration Time

Scan Interval (Pen Model)

Scan Interval (Dot Model)

50 Hz

20 ms

125 ms

1 s

60 Hz

16.7 ms

125 ms

1 s

Auto

20 ms or 16.7ms

2, 3

125 ms

1 s

100 ms

1

100 ms

–

2.5 s

1:  Selectable only on the dot model.
2:  Automatically switch by detecting the power supply frequency.
3:  The integration time is fixed to 20 ms if “Auto” is selected when using the DC power supply on a 

model with the /P1 option.

Summary of Contents for mR10000 436101

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands