YOKOGAWA IS8000, User Manual

Page: 22 / 25

4-4
IM IS8000-61EN
4.2 Setting the Synchronization Information of
Videos and Waveforms
This section explains how to set the synchronization information of the video and waveform loaded
in section 4.1.
Note
To synchronize two video data, set the synchronization conditions in the Video1 and Video2 properties.
1.
On the Video tab, click Video1 or Video2 . A video1 or video2 panel appears.
2.
Under Video1 or Video2 properties, set the appropriate items.
Video1 panel Overview panel
Video1
properties
Video frame counter
Video frame indicator
Video1 and 2 Properties
Sync
Item Description
Sync channel [Sync. Channel] Specify the waveform for establishing synchronization with the video
data. You can select a channel from the drop-down list.
Sync position [Sync. Position]* Specify the position of the synchronization waveform to align the start
frame to. You can select the following items from the drop-down list.
Trigger position [Trigger Position] The start frame is aligned with the trigger position of the
synchronization waveform.
First [First] The start frame is aligned with the beginning of the synchronization
waveform.
Start frame number [Start Frame No.]* Specify the number of the start frame.
Frame offset [Frame Offset]* Specify the number of frames to shift if the start frame needs to be
shifted.
Record rate (fps) [Record rate (fps)] Specify the video frame rate.
Number of Frames per Trigger To synchronize waveform data saved using triggers or Dual Capture
with video data, specify the number of frames per trigger.
* See “Synchronization Position Relationship between Frame Position and Sync Channel” on the next page.