YOKOGAWA IR400 series, User Manual

Page: 36 / 121

<5.DESCRIPTION OF DISPLAY AND OPERATION PANELS>
5-1
IM 11G02N01-01E
5. DESCRIPTION OF DISPLAY AND
OPERATION PANELS
This section describes the display unit and operation panel of the analyzer unit. It also explains the
name and description of function on the operation panel.
5.1 Name and description of operation panel
MODE
POWER
ESC ZERO
ENT SPAN
Display Unit
Power switch
Operation panel
● Display unit : The measurement screen and the setting items are displayed.
● Operation panel : The configuration is as shown below.
(1) MODE key
(2) SIDE key
(3) UP key
(4) DOWN key
(5) ESCAPE key
(7) ZERO key
(8) SPAN key
(7) ENTRY key
F5_1.ai
Fig. 5-1
Name Description Name Description
(1) MODE key Used to switch the mode. (5) ESCAPE key Used to return to a previous screen
or cancel the setting midway.
(2) SIDE key Used to change the selected
item (by moving the cursor) and
numeral digit.
(6) ENTRY key Used for confirmation of selected
items or values, and for execution
of calibration.
(3) UP key Used to change the selected item
(by moving the cursor) and to
increase numeral value.
(7) ZERO key Used for zero calibration.
(4) DOWN key Used to change the selected item
(by moving the cursor) and to
decrease numeral value.
(8) SPAN key Used for span calibration.