5-38
IM XL100C-E
Description • The settings changed with this command are
applied when they are saved using the XE
command.
• Parameter p2 (data length) when Modbus
RTU is selected is fixed to 8 bits.
YO
Loads the setting data
Syntax
YO p1<terminator>
p1
Path name (up to 150 characters)
Setting memory:
/SETMEMORY/file name (excluding the
extension)
Internal memory:
/INTERNALMEMORY/file name
(excluding the extension)
CF memory card:
/CFCARD/file name (excluding the
extension)
SD memory card:
/SDCARD/file name (excluding the
extension)
Example
Load the setting data from the setup file
SETFILE1 (.SET extension).
YO SETFILE1
Description This command can be specified only when a
storage medium is inserted.
YI
Saves the setting data
Syntax
YO p1<terminator>
p1
Path name (up to 150 characters)
Setting memory:
/SETMEMORY/file name (excluding the
extension)
Internal memory:
/INTERNALMEMORY/file name
(excluding the extension)
CF memory card:
/CFCARD/file name (excluding the
extension)
SD memory card:
/SDCARD/file name (excluding the
extension)
Example
Save the setting data to a file named SETFILE2
on the CF memory card.
YI /CFCARD/SETFILE2
YI SETFILE2
Description • A “.SET” extension is attached to the saved
file. This command is equivalent to the LI
command.
• This command can be specified only when a
storage medium is inserted.
YC
Resets the system (initializes the
setup data)
Syntax
YC p1<terminator>
p1
Type of data to be cleared or initialized
Initialization of the setting data:
0, 1
Example
Initialize the setting data.
YC 0
Description • This command cannot be specified while the
storage medium is being formatted.
• The date settings, communication settings,
language setting, ID number setting, slave
device address, and USB ID are not
initialized.
• This command is executed when the settings
are saved using the XE command.
YT
Sets the FTP client
Syntax
YT
p1,p2,p3,p4,p5,p6,p7,p8,p9
<terminator>
p1
Auto transfer at the end of logging
ON, OFF
p2
Reserved
p3
FTP server selection
Primary FTP server:
PRIMARY
Secondary FTP server:
SECONDARY
p4
Server name (up to 64 characters)
p5
Port number
0
to
65535
p6
Login name (up to 32 characters)
p7
Password name (up to 32 characters)
p8
PASV mode
ON, OFF
p9
Initial path (up to 64 characters)
Query
Primary FTP server query:
YT ,,PRIMARY?
Secondary FTP server query:
YT ,,SECONDARY?
Example
Set the secondary FTP server name to ymi, the
port number to 21, the login name to abc, the
password to XL100, the PASV mode to OFF, the
initial path to \ftptest\, and set the measured data
file to be automatically transferred at the end of
the logging operation.
YT ON,,SECONDARY,21,abc,XL100,OFF,
\ftptest\
Description • Parameter p1 is common to the primary and
secondary FTP servers.
• Parameter p2 is not used.
• The query response of parameter p7 is ******
(the specified password is not returned).
YG
Sets the Web server function
Syntax
YG p1,p2,p3,p4,p5<terminator>
p1
Web server function enable/disable
Enable:
USE
Disable:
NOT
p2
Monitor page enable/disable
Enable:
USE
Disable:
NOT
5.7 Basic Setting Commands