YOKOGAWA IM XL100C-E User Manual Download

Page: 121 / 134

7-8

IM XL100C-E

7.3

Communication Error Messages

This section gives a list of error codes and messages of the XL100 and their corrective

action. Error responses to communication commands are output in English.

Setting/Basic Setting/Output Communication Command and Setting Data Load Errors

Code

Message

300

Command is too long.

301

Too many number of commands delimited with ‘;’.

302

This command has not been defined.

303

Data request command can not be enumerated with sub-delimiter.

350

Command is not permitted to the current user level.

351

This command cannot be specified in the current mode.

352

The option is not installed.

353

This command cannot be specified in the current setting.

354

This command is not available during sampling or calculating.

Memory Access Errors Using Setting/Basic Setting/Output Communication
Commands

An English error message is returned via the communication interface. It is not shown on

the XL100 display.

Code

Message

360

Output interface must be chosen from Ethernet or RS by using ‘XO’ command.

362

There are no data to send ‘NEXT’ or ‘RESEND’.

363

All data have already been transferred.

Maintenance/Test Communication Command Errors

An English error message is returned via the communication interface. It is not shown on

the XL100 display.

Code

Message

390

Command error.

391

Delimiter error.

392

Parameter error.

393

No permission.

394

No such connection.

395

Use ‘quit’ to close this connection.

396

Failed to disconnect.

Other Communication M

An English error message is returned via the communication interface. It is not shown on

the XL100 display.

Code

Message

400

Input username.

401

Input password.

402

Select username from ‘admin’ or ‘user’.

403

404

No more login at the specified level is acceptable.

410

411

Summary of Contents for IM XL100C-E







































































































































Search results

Summary of Contents for IM XL100C-E

Reviews:

Related manuals for IM XL100C-E

Brands by name

Popular brands

YOKOGAWA IM XL100C-E, User Manual

Search results

Summary of Contents for IM XL100C-E

Reviews:

Related manuals for IM XL100C-E

Brands by name

Popular brands