6-2
IM XL100C-E
6.2
Bit Structure of the Status Information
The four groups of status information described below are output in response to a status
information output request using the IS command. For the output format, see “ASCII
Output Response Syntax” in section 5.2, “Response Syntax.”
Status Information 1
Bit
Name
Description
0
–
–
1
Medium access complete
Set to 1 when the display, manual sampled, or screen
image data file is finished being saved to the external
storage medium.
Set to 1 when setting data is successfully saved or loaded.
2
–
–
3
–
–
4
–
–
5
–
–
6
–
–
7
–
–
Status Information 2
Bit
Name
Description
0
Measurement dropout
Set to 1 when the measurement process could not keep up.
1
Decimal point/unit information
Set to 1 when the decimal point/unit information is change
change changed.
2
Command error
Set to 1 when there is a command syntax error.
3
Execution error
Set to 1 when an error occurs during command execution.
4
–
–
5
–
–
6
–
–
7
–
–
Status Information 3
Bit
Name
Description
0
–
–
1
–
–
2
Memory end
Set to 1 while the free space in the internal memory or
external storage medium is low.
3
–
–
4
–
–
5
–
–
6
–
–
7
–
–
