6-2
IM CA71-E
6.1 Saving Data into Memory
6.1
Saving Data into Memory
6.1.1
Saving Data in the Order of Memory Numbers
Step 1: Press the
key. The
indicator on the LCD turns on.
At this point, the indicator shows a memory number immedi-
ately following the one most recently used to save data.
Step 2: Pressing the
key saves the sourced and measured
(currently on-display) signal values at that moment into the
area with that memory number (address). Executing the
MEM SAVE function cancels the state of selecting memory,
reverting to normal setting mode.
Step 3: To save the next data item into the area with the next memory
number, press the
key once again. Now the MEM No.
indicator shows a memory number one count larger than the
previous one.
Step 4: Pressing the
key saves the sourced and measured
(currently on-display) signal values at that moment into the
area with that memory number (address) – the previous
memory number (address) + 1.
TIP
To cancel the memory mode (saving/reading), press the
key one more time.
(Executing the MEM SAVE function automatically cancels the memory mode.)
