<2. Screens>
2-5
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
2.1
Home screen
On Home screen FLXA402 assigns sensor connection numbers to up to 8 measurements
respectively.
Home screen shows up upon startup when more than two sensor connections are defined for
display and Monitor screen setting is “Off”.
If only one sensor connection (1-1) is set to display, Home screen does not appear.
A
B
C
(1)
(2)
(3)
D
Sample image of Home screen
A: 1st item: measurement value (1st line)
B: 1st item unit (1st line)
C: sensor connection number
1
D: Display name (user programmable)
(1) Page number (swichable)
*3
(2) “Converter menu switch (to Converter menu)
(3) Favorite Calibration (to calibration
*2
)
*1 If a converter is assigned instead of sensor, is displayed. (see 4.5.1)
*2 If Favorite Calibration (enabled only for pH measurement) is programmed, the page goes to the calibration startup screen. If
not, the page goes to a calibration select screen.
*3 If Page 2 is not used, the number is displayed in gray.
When an error occurs, the screen flashes.
If there is no touch operation for a certain fixed period of time, (auto return default is 10 minutes),
the screen returns to Monitor or Main screen automatically. (depending on the monitor screen
setting)
For further information on sensor connection number and Display settings see 4.5.1
