YOKOGAWA FIELDEYE II Series, User Manual

Page: 85 / 112

IM 85A7C03-16E
7-22
< 7. Accessing the Video stream>
7.3.8.
Protocols
As a network configuration on the IP-protocol-stack, protocols shown below are selectable,
If the checkbox is set by checking, the corresponding Protocols become useable and assign
a corresponding port number.
(1)
HTTP
Default TCP/IP port number value is 80.
(2)
HTTPS
Default TCP/IP port number value is 443. For detail, please refer to another instruction document
as IM85A7C04-01E, via the Web.
(3)
RTSP
For transport streams, default port number is 554
Figure 7-13 Protocols Tab
NOTE
In case of using Telnet, please be aware of the Risks of remote login of malicious users.
Suitable network managements are strongly recommended.
(See 6.1,
“Before Use of the
IP Camera” Important Notice)
(4)
Set
By clicking a Set-button, returning a belt of green success. Each setting of (1)-(3) will be reflected
to this camera after restarting.