YOKOGAWA FIELDEYE II Series, User Manual

Page: 80 / 112

IM 85A7C03-16E
7-17
< 7. Accessing the Video stream>
7.3. Network Configuration
7.3.1.
LAN
This clause describes IP address configuration for establishing session(s) of video stream(s) on the
screen(s).FC33E/U supports only IP version 4.
NOTE
To the administrator, assigning a fixed IP address is strongly recommended, so as to be able
to keep a
permission of all functions of that log-in Server via that fixed IP address always .
Figure 7-8 LAN tab
(1)
IPv4
If a Check box of
“Use DHCP Sever” is OFF, fixed IPv4 address can be set manually.
Please type a Subnet Mask and a Gateway (address) in each field.
If the C
heck box of “Use DHCP Sever” is ON, and if you are going to use DHCP protocol, please
consult your network manager in advance. Primary and/or Secondary DNS Sever address are able to
type, if you need.
(2)
Link
Select an auto negotiation setting of TCP/IP communication. If this check box is off, select physical
layer
’s aspects manually by radio buttons.
(3)
Set
By clicking a set-button, returning a belt of green success, if no error.
NOTE
Each setting of this screen will be reflected after restarting this Server camera and
rebooting the PC.When turn AC-power off, do not forget the inputted IP ddress
.