YOKOGAWA FG420, User Manual

Page: 54 / 180

40 IM FG410-01EN
4. BASIC OPERATION
4.3.5 Changing the display unit
a) Changing the prefix (unit prefix: k, m, M, etc.)
Frequency is used as an example below. The amplitude and pulse width can be changed in a similar
manner.
1.
Select frequency and then press the
ENTER key to open the input field.
ENTER
2.
Press the [Prefix] soft key and the
cursor will move to before “Hz”.
The right arrow key can also be used
to move the cursor to before “Hz”.
3.
Change the unit to MHz, kHz, Hz, mHz, or uHz with the
up/down arrow keys or the modify knob. Even when the
display unit and decimal point position are changed, the
value of the setting itself remains unchanged.
kHz display MHz display
The input field
opens.
The cursor
moves to
before “Hz”
when [Prefix] is
pressed.
Unit change
or