YOKOGAWA FC500G, User Manual, Page: 15 / 41

<2. COMPONENT NAMES AND FUNCTIONS>
2-2
IM 12F5A2-01E
2.2 Converter
Figure 2.2 shows the converter component names and their functions.
Figure 2.2 is a figure with the cover removed. Measuring range selection should be performed in
this state.
1A
FUSE
POWER
CHECK
MEAS.
ON
SPAN
OFF
SG ME RE T1 T2 G C1 C2
+ - G G L1 L2
Zero calibrator
MEAS / CHECK selection switch
Display (liquid crystal)
Measuring range
setting switch
Converter cover
Fastener
Span calibrator
Terminal cover
Measuring range
selecting jumper
Applied voltage
compemsation/fixation
selection jumper
Power switch
Fuse
External wiring
connection terminals
Power supply
voltage selection
jumper
Operated when
zero is to be
calibrated.
(To be operated
with the
terminal cover
removed.)
For converter checking,
select CHECK position.
Sets a measuring
range.
The terminal cover
should be attached
or detached with
this fastener grip
pulled out.
Operated when span
is to be calibrated.
mg/l
Figure 2.2 Converter Component Names and Their Functions
NOTE
The measuring range selection jumper and the power supply voltage selection jumper are
shipped with these set based on the desired specifications.
The specifications cannot be changed by jumper selection.