![background image](http://html.mh-extra.com/html/yokogawa/f3xs04-3n/f3xs04-3n_instruction-manual_911066009.webp)
<1. Overview >
1-1
IM 34M6H54-01E
1st Edition : Feb.01,1999-00
1.
Overview
The F3XS04-3N and F3XS04-4N Pulse Input Modules are used with the FA-M3 Range-
free Multi-controller. These modules receive and count voltage pulse signals of 0 to 20 kHz.
A single F3XS04 module can receive up to 4-channel pulse signals.
Features
•
Up to 20-kHz pulse signals can be received with four independent inputs.
•
The input and output terminals are insulated from the internal circuit with
photocouplers.
•
A filter can be selected using software to suppress chattering in the input signals.
•
At the count edge, either the rising edge or the falling edge can be selected.
•
Incorporates a 16-bit ring-up counter. The maximum ring size is programmable.
•
Each channel can have two preset values.
•
Generates various types of outputs for combinations of counter values and preset
values.
•
A single channel can set up to four external programmable outputs.
•
Generates an interrupt signal when the counter value reaches a preset value or
exceeds its maximum value.
•
Counter operation can stop immediately after the counter value returns to zero.
Summary of Contents for F3XS04-3N
