YOKOGAWA DX Series Driver Manual Download Page 51

Page: 51 / 56

Yokogawa DX Serial Driver

1. Verify the cabling between the PC and the PLC device.

2. Verify that the specified communications parameters match those of the device.

COMn does not exist

Error Type:

Fatal

Possible Cause:

The specified COM port is not present on the target computer.

Solution:

Verify that the proper COM port has been selected.

COMn is in use by another application

Error Type:

Fatal

Possible Cause:

The serial port assigned to a device is being used by another application.

Solution:

1. Verify that the correct port has been assigned to the channel.

2. Verify that only one copy of the current project is running.

Error opening COMn

Error Type:

Fatal

Possible Cause:

The specified COM port could not be opened due to an internal hardware or software problem on the target
computer.

Solution:

Verify that the COM port is functional and may be accessed by other Windows applications.

Unable to set comm parameters on COMn

Error Type:

Fatal

Possible Cause:

The serial parameters for the specified COM port are not valid.

Solution:

Verify the serial parameters and make any necessary changes.

www. ptc.com

Summary of Contents for DX Series
























































Search results

Summary of Contents for DX Series

Reviews:

YOKOGAWA DX Series, Driver Manual, Page: 51 / 56

Search results

Summary of Contents for DX Series

Reviews: