YOKOGAWA DTSXL, User Manual, Page: 90 / 289

< PART – B Software >
B-7
IM 39J06B40-01EN 14th Edition: May 30, 2022
SEE ALSO
COM ports of the DTSX3000 use RJ45 connectors. Thus, when connecting the DTSX3000 to a control
device using RS-232-C, use a dedicated cable with an RJ45 connector on one end and a connector
compatible with the control device on the other end. See the Hardware part of this manual for wiring
details.
B1.3.2. Connecting to Various Software for DTSX3000
Software for the DTSX3000, when purchased separately and used with the DTSX3000,
enables measurement, data conversion and calibration to be done easily using a
graphical user interface (GUI).
- IP Address Configurator software (available on the accompanying CD-R)
Enables configuration of the IP address.
- DTSX3000 Control Visualization Software (DTAP3000 optional purchase)
Enables configuration of measurement conditions, measurement execution and
control, as well as retrieval and display of measurement data to be done easily
using a graphical user interface (GUI).
- LAS 2.0 Data Conversion Software (included in the DTAP3000 optional purchase)
Enables configuration and conversion of measurement data to LAS 2.0 format or
CSV format to be done easily using a graphical user interface (GUI).
- Calibration Software (included in the DTAP3000 optional purchase)
- DTSX3000 Data Conversion Software WITSML1.3.1.1 (DTAP3000D optional
purchase)
Enables configuration and conversion of measurement data to WITSML 1.3.1.1
format to be done easily using a graphical user interface (GUI
Figure Example of Connections when using DTSX3000 Control Visualization Software and
Data Conversion Software
IMPORTANT
We recommend using the latest versions of software for DTSX3000. Beware that some
DTSX3000 functions may be unavailable if an older version is used. About latest version
of DTAP3000 DTSX3000 Control Visualization Software, contact your Yokogawa sales
representative or local distributor.