YOKOGAWA DTSXL, User Manual, Page: 24 / 289

< PART – A Hardware >
A-1
IM 39J06B40-01EN 14th Edition: May 30, 2022
A1. DTSXL System
This section describes the hardware of the DTSXL System
A1.1. Structure and Names of Each Component
Unit
The DTSXL System is comprised of the following modules:
- Base module (This is the module to which other modules such as the power supply
module, CPU module, DTSX3000 Distributed Temperature Sensor, and Optical
Switch modules are installed)
- DTSX3000 Distributed Temperature Sensor (Main module of the DTSXL Distributed
Temperature Sensor Long Range System with built-in communication functions)
- Optical Switch module (module with built-in optical switch required for channel
switching in multi-channel measurement)
- Rack Mount kit (required for reducing the load on the optical fiber connector)
- Optical Fiber for DTSX (used for checking the operation of the DTSX3000
Distributed Temperature Sensor.)
- Power Supply module (STARDOM module supplying power to each module)
- CPU module (STARDOM module with CPU functions)
SEE ALSO
For details on the power supply modules (NFPW426, NFPW441, NFPW442 and NFPW444) and CPU
module (NFCP050), see General Specifications of the STRADOM FCN/FCJ (GS 34P02Q12-01E, GS
34P02Q13-01E) and the STARDOM FCN/FCJ Guide (IM 34P02Q01-01E).
Figure Names of DTSXL System
Power Supply module
CPU
module DTSX3000 Distributed Temperature Sensor
Optical Switch module
Base
Module
Rack Mount
kit