YOKOGAWA DTSXL, User Manual, Page: 209 / 289

< PART – B Software >
B-126
IM 39J06B40-01EN 14th Edition: May 30, 2022
B10. Sectional Data Generation
B10.1. Overview
DTSX3000 can split temperature measurement data according to user-defined sections,
perform calculation on temperature data within each section and output the calculation
result as sectional data.
In this chapter, configuration of conditions for sectional data generation is described in
Section B10.2, “Configuration of Sectional Data Conditions” and the output result of
sectional data generation is described in Section B10.3, “Sectional Data Results.”
B10.2. Configuration of Sectional Data Conditions
Sectional data conditions can be configured via Modbus.
SEE ALSO
For details, see the DTSX3000 Communications Guide (IM 39J06B40-02EN).
Sectional data conditions can also be configured as described below using the
DTSX3000 Control Visualization Software (DTAP3000), which is available as a separate
purchase.
The settings in the above screen capture define sections for sectional data generation
as shown in the figure below.