YOKOGAWA DTSXL, User Manual, Page: 140 / 289

< PART – B Software >
B-57
IM 39J06B40-01EN 14th Edition: May 30, 2022
B6.4.7. SSH & SFTP Configuration (SSH & SFTP)
You can enable or disable the SSH, TELNET and FTP server functions in SSH & SFTP
Configuration.
-
SSH
If using SSH, select yes; if not using SSH, select no.
Be sure to select yes if connecting to the DTSX3000 using the DTSX3000 Control
Visualization Software or the DTSX3000 Data Conversion Software.
Tip
The SSH2 protocol is used.
- SFTP
If using SFTP, select yes; if not using SFTP, select no.
To use SFTP, you need to enable SSH. Be sure to select yes if connecting to the
DTSX3000 using the DTSX3000 Control Visualization Software or the DTSX3000
Data Conversion Software.
- TELNET
If using TELNET, select yes; if not using TELNET, select no.
TELNET communication is unencrypted so we recommend disabling TELNET
unless there is some special reason not to do so.
- FTP
If using FTP, select yes; if not using FTP, select no. FTP communication is
unencrypted so we recommend disabling FTP unless there is some special reason
not to do so.
After selecting the above options, click the [Set] button. The changes are applied after
reboot.
Tip
- Up to four SSH and TELNET connections are allowed.
Save the above settings to
DTSX3000.
Initialize to factory settings.