YOKOGAWA DT450G Series, User Manual, Page: 28 / 41

<4. Operation>
4-1
IM 11K01C01-01E
4. Operation
The ranges and other parameters of the DT450G must be configured before you start operation.
This chapter explains how to operate the DT450G, including preparations, in the following order
of topics.
• Components and their functions
• Preparation for operation
• Regular operation
4.1 Components and Their Functions
Name&Func.ai
Not used
[A]Key [B]Key [C]Key
Not used
mA-
mA+
no
c
nc
no
c
nc
Output
RL2
(Relay contact)
RL1
(Relay contact)
SHIELD
AC1
AC2
Power Supply Connector
Parameter Setting Button
LED Display
Display lamp Green: Operation
Red : Autotuning
Auto Setup Button
Figure 4.1 Components of the DT450G and Their Functions