YOKOGAWA DPharp EJX510B, User Manual

Page: 86 / 89

< 11. General Specifications >
11-4
IM 01C27F01-01EN
11.3 Optional Specifications

OPTIONAL SPECIFICATIONS (For Explosion Protected type)
Item Description Code
Factory Mutual (FM) FM Intrinsically safe Approval FS17*
ATEX ATEX Intrinsically safe Approval
KS27*
Canadian Standards Association (CSA) CSA Intrinsically safe Approval CS17*
IECEx IECEx Intrinsically safe Approval SS27*
* Only applicable for selecting Electrical connection code J.

OPTIONAL SPECIFICATIONS
Item Description Code
Painting Color change
Amplifier cover only P

Coating change Anti-corrosion coating *1 X2
Oil-prohibited use *10 Degrease cleansing treatment K1
Degrease cleansing treatment with fluorinated oilfilled capsule.
Operating temperature -20 to 80°C ( -4 to 176°F)
K2
Capsule fill fluid Fluorinated oil filled in capsule
Operating temperature -20 to 80°C ( -4 to 176°F)
K3
Calibration units *2 P calibration (psi unit)
(See Table for Span and Range Limits.)
D1
bar calibration (bar unit) D3
M calibration (kgf/cm
2
unit) D4
Gold-plated diaphragm*
10
Surface of isolating diaphragms are gold plated, effective for hydrogen
permeation.
A1
European Pressure
Equipment Directive *11
PED 2014/68/EU
Category III, Module H, Type of Equipment: Pressure Accessory-Vessel,
Type of Fluid: Liquid and Gas, Group of Fluid: 1 and 2.
PE3
Material certificate *3 Process Connector M15
Pressure test/
Leak test certificate *9
Test Pressure: 200 kPa (29 psi)*
4
Nitrogen(N
2
) Gas or Water *8
Retention time: one minute
T05
Test Pressure: 2 MPa (290 psi)*
5
T06
Test Pressure: 10 MPa (1450 psi)*
6
T07
Test Pressure: 50 MPa (7200 psi)*
7
T08
*1: Not applicable with color change option.
*2: The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1 , D3 , and
D4 .
*3: Material traceability certification, per EN 10204 3.1 B.
*4: Applicable for capsule code A .
*5: Applicable for capsule code B .
*6: Applicable for capsule code C .
*7: Applicable for capsule code D .
*8: Pure nitrogen gas or pure water is used for oil-prohibited use (option codes K1 and K2 ).
*9: The unit on the certificate is always kPa/MPa regardless of selection of option code D1 , D3 and D4 .
*10: Applicable for wetted parts material code S .
*11: Applicable for measurement span code D . If compliance with category III is needed, specify this option code.

OPTIONAL ACCESSORIES
Product Part number Specification
Battery pack assembly F9915NQ *1 Battery case, Lithium-thionyl chloride batteries 2 pieces
Batteries *2 F9915NR Lithium-thionyl chloride batteries, 2 pieces
Battery case F9915NK *3 Battery case only
Remote antenna cable F9915KU 3 m with mounting bracket
F9915KV 13 m (3 m+10 m), with a surge protective device and mounting bracket
Antenna F9915KW 2 dBi standard antenna
F9915KY 6 dBi high gain antenna *4*5
*1: If you need F9915MA, please purchase F9915NQ. F9915NQ is a set of F9915MA and instruction manual.
*2: Alternatively, Tadiran SL-2780/S or TL-5930/S batteries can be purchased from your local distributor.
*3: If you need F9915NS, please purchase F9915NK. F9915NK is a set of F9915NS and instruction manual.
*4: Use of high gain antenna is limited by local regulation of radio and telecommunication law. Consult Yokogawa for details.
*5: It can not be used by connecting directly to the main unit. Remote antenna cable that separately arranged is needed to connect.