YOKOGAWA DOX8HS, User Manual, Page: 17 / 32

< 2. Names and Functions >
2-1
IM 19H1D2-01E
2. Names and Functions
Drip-proof cap
Leads the cable downwards
and prevents rain from entering
the bolder.
Sensor holder
Since the sensor is installed
at a 45° angle. Air bubbles
do not adhere to the front end
of the sensor.
(Sensor holder)
Holder without washing device
Holder with washing device
O-ring
Prevents the solution to be
measured from entering
the holder.
Sensor securing nut
Jet washing device
Cleans the sensor
Front end by spraying
it with an air or water jet
Note: The figure shows a polypropylene holder. The stainless steel model differs slightly.
Adapter
Pipe for washing utility;
supplied when 1/2 NPT
is specified.
Clamp
Secures the sensor holder
to the washing device holder.
Washing device holder
Holds the jet washing
device to provide a washing
utility. Two hooks support
the sensor holder.
Holder without washing device
Holder with washing device Stainless steel
Sensor holder
Pipe
Pipe
Washing device holder
Bracket
Sensor holder
Washing device holder
Figure 2.1 Names and Functions