manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 99 / 190

Share
Download
YOKOGAWA DL850 ScopeCorder User Manual Download Page 99

4-15

IM DL850-03EN

Common Operations

1

2

3

4

5

6

App

Index

4.8  Starting and Stopping Waveform Acquisition

Starting and Stopping Waveform Acquisition.

Press 

START/STOP

 to start or stop waveform acquisition.

The key is illuminated while the DL850/DL850V is acquiring waveforms.

Waveform Acquisition and Indicators

•  When the START/STOP key is illuminated, the DL850/DL850V is acquiring waveforms. “Running” 

appears in the lower left of the screen.

•  When the START/STOP key is not illuminated, waveform acquisition is stopped. “Stopped” appears 

in the lower left of the screen.

DL850/DL850V Operation When the Acquisition Mode Is Set to 

Averaging

•  Averaging stops when you stop waveform acquisition.
•  If you restart waveform acquisition again, averaging starts from the beginning.

START and STOP Operations during Accumulation

•  Accumulation stops when you stop acquisition.
•  If you restart waveform acquisition, past waveforms are cleared, and accumulation starts over.

Note

You can use the snapshot feature to retain the displayed waveform on the screen. This feature allows you to 
retain a waveform on the screen while the DL850/DL850V continues signal acquisition.

Summary of Contents for DL850 ScopeCorder































































































































































































Reviews:

No comments