13-3
13
IM 701830-01E
Other Operations
13.2 Setting the Message Language, Click Sound and
Brightness of the LCD
Function
Message language selection
When there is an error, a message will appear. You can display these messages in Japanese, in
English, in French, in German, or in Italian. The code No. for each error message is the same
whether messages are in English, in French, in German or in Italian. For description of each
message, refer to page 14-2.
Setting the intensity of the LCD
The brightness of the liquid crystal display can be adjusted. The darkest setting is “–1,” and the
brightest setting is “7.”
The click sound ON/OFF
This function enables you to decide whether or not a click sound is made when the jog shuttle is
turned. This function is set to ON as the default.
Operating Procedure
1.
Press the
MISC
key.
2.
Press the “
System Config
” soft key to display the system configuration setting menu.
Message language selection
3.
Press the “
Message
” soft key to select either “
JPN
” “
ENG
,” “
FRN
,” “
GER
,” or “
ITL
.”
Depending on the suffix code of your instrument (help language), some languages may not
be supported.
The click sound ON/OFF
3.
Press the “
Click Sound
” soft key to select either “
ON
” or “
OFF
.”
Setting the intensity of the LCD
3.
Set the value for the “
LCD Brightnes
” with the jog shuttle.
→
