11-16
IM 701830-01E
11.10 Copying Files
Function
This function lets you copy your saved files from one location (floppy, Internal hard disk, or
SCSI device) to another.
Precautions to be taken when copying a file
• Copying is not possible while acquisition is in progress. To enable copying, press the
START/STOP
key to stop acquisition.
• Copying a file to a file with a different identifier is not possible.
• If the copy destination is an Internal hard disk or SCSI device, you must also specify the
destination directory.
Operating Procedure
Displaying the copy menu
1.
Press the
FILE
key.
2.
Keep pressing the “
Function
” soft key until “
Copy
” is selected.
Selecting the data format
3.
Keep pressing the “
Mode
” soft key to select the desired format from “
Waveform
” to
“
Image
.”
Entering the copy source and destination file names and comment
4.
Turn the jog shuttle to select the file to be copied.
5.
Press the “
File Name
” soft key to display the keyboard screen.
6.
Enter the desired file name for the copy destination file using the procedure described on
page 4-2.
7.
Enter a comment as well if you like.
Select the copy destination
8.
Press the “
Destination
” soft key as necessary to select the destination (FD, SCSI, or HD).
9.
If you have selected “
SCSI
” or “
HD
,” turn the jog shuttle to select the destination directory.
For details about directories, refer to Section 11.5, “Selecting the Medium and Directory.”
Starting copying
10.
Press the “
Save
” soft key to start copying.
To stop copying, press the “
Abort
” soft key.
Note
If you select a directory number for a nonexistent directory as your destination, an error will occur when the
copy is executed. (Note that floppy disks do not have high level directories.)
