YOKOGAWA DL1720E, User Manual

Page: 52 / 186

5-17
IM 701730-17E
Commands
5
5.3 ASETup Group/5.4 CALibrate Group
5.3 ASETup Group
The commands in the ASETup group are used for setting and querying auto-setup. This allows you to make the
same settings and queries that you can make using the Auto Setup menu of SETUP on the front panel.
:ASETup : EXECute
UNDO
5.4 CALibrate Group
The commands in the CALibrate group are used for setting and querying the calibration. This allows you to make
the same settings that you can make using the Calibration menu of MISC on the front panel.
:CALibrate : EXECute
DESKew : MODE <Space> OFF
ON
<NRf>
?
TARGet <Space> <NRf>
?
TIME <Space>
?
?
MODE <Space> AUTO
OFF
?
?
;
;
<Time>
:CALibrate?
Function Queries all calibration settings.
Syntax :CALibrate?
Example :CALIBRATE? -> :CALIBRATE:MODE OFF;
DESKEW:MODE 0;TARGET 1;TIME 0.0E+00
:CALibrate:DESKew?
Function Queries all settings related to skew
compensation.
Syntax :CALibrate:DESKew?
Example :CALIBRATE:DESKEW? ->
:CALIBRATE:DESKEW:MODE 0;TARGET 1;
TIME 0.0E+00
:CALibrate:DESKew:MODE
Function Turns the skew compensation ON/OFF or
queries the current setting.
Syntax :CALibrate:DESKew:MODE {<Boolean>}
:CALibrate:DESKew:MODE?
Example :CALIBRATE:DESKEW:NODE ON
:CALIBRATE:DESKEW:MODE? ->
:CALIBRATE:DESKEW:MODE 0
:CALibrate:DESKew:TARGet
Function Sets the channel on which skew compensation
is to be performed or queries the current
setting.
Syntax CALibrate:DESKew:TARGet {<NRf>}
:CALibrate:DESKew:TARGet?
<NRf>=1 to 4 (1 to 2 on the DL1720E)
Example :CALIBRATE:DESKEW:TARGET 1
:CALIBRATE:DESKEW:TARGET? ->
:CALIBRATE:DESKEW:TRAGET 1
:CALibrate:DESKew:TIME
Function Sets the skew compensation time that are
common to all channels or queries the current
setting.
Syntax :CALibrate:DESKew:TIME {<time>}
:CALibrate:DESKew:TIME?
<time>=–100 ns to 100 ns
Example :CALIBRATE:DESKEW:TIME 1NS
:CALIBRATE:DESKEW:TIME? ->
:CALIBRATE:DESKEW:TIME 1.000E-09
:ASETup:EXECute
Function Executes auto-setup.
Syntax :ASETup:EXECute
Example :ASETUP:EXECUTE
:ASETup:UNDO
Function Cancels auto set-up settings.
Syntax :ASETup:UNDO
Example :ASETUP:UNDO